YOU ARE RUNNING ON A REMCOS-TSS8 COMPUTER. YOU SHOULD HAVE WITH YOU A
COPY OF THE "TSS/8 USER'S GUIDE" WHICH EXPLAINS THE SYSTEM IN DETAILS.

REMCOS-TSS8 ACCEPTS THE FOLLOWING LANGUAGES: ALGOL, BASIC, FOCAL, 
FOCARL, FORTRAN-D, LISP, LOGSIM, AND PALD.

SPECIAL CHARACTERS ARE USED HERE TO DISTINGUISH INTERACTIONS BETWEEN THE
USER AND COMPUTER. THEY ARE NOT PARTS OF THESE OPERATIONS:

-  "ECHO OF THE TERMINAL"

-  'LABEL OF THE TERMINAL KEYBOARD'

-  <USER'S RESPONSE>

-  (EXPLANATION OF OPERATIONS)

EXCEPT BASIC, COPY, AND EDIT, ALL PROGRAMS AND LANGUAGE COMPILERS ARE
STORED IN MAGTAPE LIBRARY. THEREFORE, TO ACCESS ANY OF THESE PROGRAMS,
USER SHOULD USE COPY TO TRANSFER THE DESIRED PROGRAM OR COMPILER FROM
MAGTAPE TO USER'S FILE. REMEMBER TO PRESS 'RETURN' AFTER EACH RESPONSE.

EXEMPLE:  LIST MAGTAPE LIBRARY DIRECTORY AND COPY CATLOG FROM MAGTAPE
--------  LIBRARY TO USER'S FILE.

<"^BS"> (HOLD 'CTRL' DOWN WHILE PRESSING 'B'. RELEASE 'CTRL'. PRESS 'S')

<R COPY>  (CALLING COPY FROM SYSTEM LIBRARY INTO CORE)

OPTION- <LIST>
DEVICE- <D1>

(MACHINE WILL PRINT THE DIRECTORY OF THE MAGTAPE MOUNTED ON DRIVE # 1)

OPTION- <COPY>                      (COPY CATLOG FROM
INPUT- <D1:CATLOG>                  (MAGTAPE MOUNTED ON DRIVE # 1
OUTPUT- <CATLOG>                    (TO USER'S FILE.

OPTION- <EXIT>
.^BS

THE FOLLOWING SUMMARY IS USED FOR QUICK REFERENCE. FOR DETAILS INFOR-
MATION, USER SHOULD REFER TO THE INDIVIDUAL MANUAL OF EACH LANGUAGE.

****  BASIC

1.  <R BASIC>  (CALLING BASIC FROM SYSTEM LIBRARY INTO CORE)
2.  NEW OR OLD-- <OLD>  (NEW IF PROGRAM IS ENTERED FROM KEYBOARD
                        (OR PAPER TAPE READER.
3.  OLD PROGRAM NAME-- <CATLOG (OR NAME OF ANY STORED PROGRAM)>
4.  READY
5.  <RUN>  (EXECUTE PROGRAM CALLED IN STEP 3)
6.  (RESULTS OF THE CALLED PROGRAM WILL BE PRINTED HERE).
7.  READY  (EXECUTION IS COMPLETED. TO RERUN THIS PROGRAM, REPEAT STEP
           5. TO SAVE NEW PROGRAM IN USER'S FILE, TYPE <SAVE>. TO RUN
           ANOTHER STORED PROGRAM, REPEAT STEPS 2 THRU 6).
8.  TO STOP A RUNNING BASIC PROGRAM, TYPE "^C". TO LEAVE BASIC ENTIRELY,
    TYPE <BYE> OR "^BS".
9.  TO READ IN A PAPER TAPE IN UNDUPLEX MODE, TYPE <TAPE> BEFORE TURNING
    THE READER ON. TYPE <KEY> WHEN FINISHED.

****  FOCAL

1.  <RUN FOCL>  (CALLING FOCL FROM USER'S FILE INTO CORE)
2.  SHALL I RETAIN LOG, EXP, ATN ?: <YES>         (IF ANS. NO, MACHINE
3.  SHALL I RETAIN SINE, COSINE ?: <(YES OR NO)>  (WILL PRINT LINE 3.
4.  PROCEED
5.  * <E A>
6.  * <L C (NAME OF STORED PROGRAM)>  (IF PROGRAM IS ENTERED THRU THE
           KEYBOARD OR PAPER TAPE READER, OMIT THE RESPONSE).
7.  * <G>  (EXECUTE PROGRAM CALLED IN STEP 6).
8.  (RESULTS OF THE CALLED PROGRAM WILL BE PRINTED HERE).
9.  * (EXECUTION IS COMPLETED. TO RERUN THIS PROGRAM, REPEAT STEP 7.
      TO SAVE NEW PROGRAM IN USER'S FILE, TYPE <L S (NAME OF PROGRAM)>.
      TO RUN ANOTHER STORED PROGRAM, REPEAT STEPS 5 THRU 8).
10. SAME AS STEP 8 OF THE BASIC LANGUAGE.
11. SAME AS STEP 9 OF THE BASIC, BUT REPLACE TAPE WITH "^R", AND KEY
    WITH "^T".

****  FOCARL

1.  <RUN FOCR>

    SAME AS FOCAL AND THE REMAINING RULES ARE UNCHANGED.

****  ALGOL

1.  <RUN ALGL>

    ALL RULES REMAIN UNCHANGED.

****  LISP

1.  <RUN LISP>

    ALL RULES REMAIN UNCHANGED.

****  LOGSIM

1.  <RUN LOSI>

    ALL RULES REMAIN UNCHANGED.

****  FORTRAN-D

1.  <RUN FORT>

    ALL RULES REMAIN UNCHANGED.

****  PALD

1.  <RUN PALD>

    ALL RULES REMAIN UNCHANGED.



                         JUNE  1973



^BS