ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Main help º º º º To select a command, move the cursor to the corresponding icon and press º º the RETURN key. If a menu appears, then move the highlight bar to the º º desired function and press RETURN. Shortcut: press the key representing º º the first character in the icon or menu item name to invoke the function. º º The two left-most icons are used to display the drawing and paint colors. º º º º Key Mouse Function º º º º ESC Left button Abort current command, menu or prompt. º º RETURN Middle button Select icon, menu item, or complete a command. º º INS Right button Anchor toggle for lines and edit blocks. º º Mouse: must hold right button down. º º   move left/right Horizontal cursor, menu bar movement. º º   move up/down Vertical cursor movement, numerical prompts. º º SHIFT  ---- Single pixel cursor movement. º º ALT  ---- User defined cursor movement. º º CTRL   ---- Rotate Conics and Text in place. º º HOME ---- Expand edit block to full size. º º SPACE ---- Toggle icons on/off. º º F1 ---- Undo function (see System command). º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Icons (vertical arrows) º º º º This command toggles the icons between the top and bottom of the screen. º º The current command is still active. The icons are non-destructive, the º º displaced graphics are saved in memory. The Icons command is disabled º º when a temporary grid is active and during Zoom/pixel edit mode. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º System (computer) º º º º Coordinates: Select cartesian (x,y) or offset/bit mask coordinate º º system. The cartesian system allows a user definable º º origin and positive direction selection. º º º º Keyboard: User definable cursor increments for ALT arrow keys. º º Default dx=72, dy=40. Use  and  arrow keys or vertical º º mouse movement for new delta values. º º º º Mouse: Turn mouse on by selecting a port number. The mouse brush º º determines if multiple command executions are allowed by º º holding the RETURN button down while moving the mouse. º º Continious=yes (default), singular=no. º º º º Undo: Turn undo feature on or off. Undo buffer is updated when º º a new (editing) icon is selected. Press F1 to switch º º screen with undo image. Press again to reverse undo. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Lines (pencil tip) º º º º Straight: Use INS key to anchor line end point. Keep anchor mode active º º to create a line string or disable anchor mode before pressing º º RETURN to create lines of same size and angle. º º º º Freehand: Use INS key to toggle pen up/down. Works best with a mouse. º º º º Width: Select one of four line widths. Lines, conics, text, and º º permanent grids are affected. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Erase (pencil eraser) º º º º Block: Use the INS key to set the block size. Move the block to the º º desired area and press RETURN to erase. º º º º Screen: Erase individual graphics planes or entire screen at once. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Conics (cone & plane) º º º º The Conics icon is used to draw ellipses, arcs, and polygons in the º º current line width and at the current tilt angle. You can rotate items º º in place (3 degree increments) by pressing CTRL  and CTRL . º º º º Circles and Polygons º º º º To change the size of a circle or polygon, press the INS key to anchor, º º move the cursor left or right to get the desired size, and press the INS º º key again to release the anchor. Mouse users: the INS button must be º º held down while moving the cursor. To draw the item, move the cursor to º º the desired location and press RETURN. º º º º Ellipses, Arcs, and Rectangles º º º º Size change is same as above except use up and down cursor movement in º º addition to left and right movement while item is anchored. º º º º Tilt: Use  and  arrow keys or vertical mouse movement to change the º º initial tilt angle. Values range from 0 to 357 in 3 degree º º increments. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Paint (paint brush) º º º º The Paint icon will allow you to fill an enclosed area with a paint mix º º or pattern, and spray paint an area with the current drawing color. º º A paint mix is a checkerboard combination of two colors. There are 36 º º possible paint mix colors. A paint pattern is a rectangular area captured º º from the screen with the Pattern command. Paint patterns can be up to º º 32 by 20 pixels and contain any combination of colors. º º º º Replacement painting replaces the background color with the paint mix or º º pattern. Border painting paints over an area until it reaches the border º º color (which you will be prompted for). Move the cursor to the starting º º point and press RETURN. Press any key on the keyboard to abort painting. º º If you get incomplete painting with a pattern, you should pre-paint the º º area with a neutral mix color. º º º º Spray: Spray a dot pattern in current color. Use INS key to change º º size of spray block. Move to desired area and press RETURN. º º º º Pattern: Capture a pattern from the screen. Use INS key to change size º º of pattern. Press RETURN to capture a pattern. Use File icon º º for saving and retrieving patterns on disk. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Text (Capital T) º º º º The Text icon is used to draw text in the current line width and at the º º current angle. The text block can be rotated in place (in 3 degree º º increments) with the CTRL  and CTRL  keys. º º º º Input: Enter text with the keyboard and press RETURN. Move the cursor º º to the lower left starting point and press RETURN. You can º º scale the text to any size by using the INS key and moving the º º cursor down (to make text taller) and left (to make text wider). º º º º Font: Load a font from the current directory. Use the File icon to º º change the current directory. º º º º Angle: Use  and  arrow keys or vertical mouse movement to change the º º initial text angle. Values range from 0 to 357 in 3 degree º º increments. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Block (toy block) º º º º The Block icon is used to edit block sections of the screen. The cursor º º will appear as a variable sized rectangle. To change the size of the º º edit block, press the INS key to anchor the bottom left corner, move the º º cursor to get the desired size, then press the INS key again to release º º the anchor. Mouse users: hold the INS button down while moving the cursor º º to change the block size. Use the HOME key to expand block to full size. º º º º The Move function will move a block of graphics from one area to another º º and then erase the source area. The Copy function will copy a block to º º one or more areas. Press ESC to return from destination mode to source º º mode. The Fill function will fill a block with the current drawing color. º º º º The Scale function will enlarge or shrink a block by a factor of two. º º The Rotate function will rotate a block horizontally, vertically or 90 º º degrees clockwise. The Transpose function will flip a block horizontally º º or vertically to create a mirror image. º º º º The Boolean function allows you to edit individual graphics plane colors º º with AND/OR/XOR commands. The Palette function is used to change colors º º of graphics already drawn on the screen without affecting other colors. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Zoom (magnifying glass) º º º º The zoom function will temporary expand a block of graphics by a factor º º of 4 to allow for the editing of individual pixels. Move the zoom block º º to the source area and press RETURN. Move the cursor inside the source º º (small) block and you will see a corresponding cursor inside the zoom º º window. Press RETURN to change a pixel to the current color. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Grid (yellow grid) º º º º There a two types of grids that may be created: Permanent and Temporary. º º Temporary grids are non-destructive dot grids that allow you to line up º º graphs and other images on the screen. Invoke the Temporary grid command º º a second time to remove the temporary grid. Permanent grids can be º º created in solid or dotted lines with the current drawing color and in º º the current line width. Use the INS key to set the grid block size. º º º º Format: Select solid or dotted lines for permanent grids. º º º º Size: The two size settings are for Variable and Fixed sized º º grids. If you want a certain distance between grid lines º º then use the Fixed size and set the X and Y spacing to the º º distance (in pixels) between grid lines. If you want a º º certain number of grid boxes in the grid then use the º º Variable setting and set the X and Y spacing to the grid º º count. º º º º X/Y-spacing: Use the  and  arrow keys or vertical mouse movement to º º set the value to be used for grid size or count, depending º º on the Size setting. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º File (floppy disk) º º º º Screen: Retrieve, save, list, and erase screen files in the current º º directory. The images are compressed (packed) to use less º º disk space. A Method option allows you to combine screen º º images (Replace, Or, Xor). º º º º Block: Retrieve, save, list, and erase graphics blocks on disk, in º º the current directory. Works similar to Block/Move command. º º º º Pattern: Retrieve, save, list, and erase paint patterns on disk, in º º the current directory. Transfer works directly between disk º º and paint pattern icon. º º º º Directory: View and/or change the current directory. Path must begin º º with "d:\" where "d" is the current disk drive. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Dump (printer) º º º º Screen dumps require a dot matrix printer that supports the Epson escape º º codes for graphics printing. Printing can be aborted in progress by º º pressing any keyboard key. º º º º Sideways: Dump the screen graphics in a sideways position. Single plane º º colors (blue, red, green) are printed in the lightest shade. º º Two plane colors (magenta, cyan, yellow) are printed in a º º medium shade and the three plane color (white) is printed in º º the darkest shade. º º º º Upright: Dump the screen graphics in an upright position. All non- º º black colors are printed in one shade. º º º º Margin: Use the  and  arrow keys or vertical mouse movement to set º º a left print margin (0-40). A value of 10 or 12 will produce º º a one inch margin. º º º º Video: Select Normal or Reverse video for printing. Reverse video º º will temporarily invert the screen image during printing. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Quit (stop sign) º º º º A Yes/No menu will appear for exit confirmation. Remember to save your º º work before quitting. Temporary grids and icons will be removed and the º º mouse port interrupts will be restored if used. The program will exit to º º the current directory. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Press any key ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ