Directory of image this file is from
This file as a plain text file
$19 PDP8A DRIVE
#6 FUNCTIONAL TEST
SYSTEM TYPE SELECTED: #1
SELECT A DRIVE CONFIGURATION:
TYPE:
1 - TO TEST DRIVE 0 ONLY.
2 - TO TEST DRIVE 1 ONLY.
3 - TO TEST BOTH DRIVES.
4 - TO TEST THE CONTROLLER ONLY.
R - TO RETURN TO THE TEST CATEGORY SELECTION MENU.
&1234R% MENU 16
#1
WS78
WS100 OR WS102
WS81, WS82, WS211, WS212, OR WS202
WS200
#6 DRIVE TYPE
RX01
RX02
$17 AIRXAG DIRECTIONS - NOT CONTROLLER ONLY MENU
#1 FUNCTIONAL TEST
UNIT CONFIGURATION: #7
DRIVE CONFIGURATION: #8
DEVICE CODE SELECTED: #9
#6
SCRATCH FLOPPIES MUST BE INSTALLED IN DRIVES TO BE TESTED
BEFORE STARTING TESTS. ANY INFORMATION ON THE SCRATCH DISKETTE
WILL BE ERASED BY THIS TEST. UNTESTED DRIVE DOORS MUST BE OPEN
BEFORE TESTING BEGINS.
ONCE THE TEST IS STARTED, TYPING CTRL-C WILL STOP THE TEST.
AFTER CTRL-C, AN INSTRUCTION MENU WILL BE DISPLAYED. TYPING
CTRL-C IS THE ONLY WAY TO STOP THE TEST AFTER THE TEST IS
STARTED.
>TYPE "R" TO RETURN TO THE TEST CATEGORY SELECTION MENU.
>TYPE <RETURN> TO START THE TEST.
&R
% MENU 17
#1
WS78
WS100 OR WS102
WS81, WS82, WS211, WS212, OR WS202
WS200
#6
RX01 MODE
RX02 MODE. NOTE: DO NOT PRESS CTRL-C WHILE DOUBLE DENSITY IS SET.
#7 UNIT
TEST UNIT A ONLY.
TEST UNIT B ONLY.
TEST BOTH UNITS A AND B.
TEST CONTROLLER ONLY.
#8 DRIVE
TEST DRIVE 0 ONLY.
TEST DRIVE 1 ONLY.
TEST BOTH DRIVES.
TEST CONTROLLER ONLY.
#9
75
76
$69 CONTROLLER ONLY TESTED
#1 #6 FUNCTIONAL TEST
CONTROLLER ONLY TESTED
DEVICE CODE SELECTED: #9
ALL DRIVE DOORS MUST BE OPEN BEFORE STARTING THE TEST.
ONCE THE TEST IS STARTED, TYPING CTRL-C WILL STOP THE TEST.
AFTER CTRL-C, AN INSTRUCTION MENU WILL BE DISPLAYED. TYPING
CTRL-C IS THE ONLY WAY TO STOP THE TEST AFTER THE TEST IS
STARTED.
>TYPE "R" TO RETURN TO THE TEST CATEGORY SELECTION MENU.
>TYPE <RETURN> TO START THE TEST.
&R
% MENU 69
#1
WS78
WS100 OR WS102
WS81, WS82, WS211, WS212, OR WS202
WS200
#6 DRIVE TYPE
RX01
RX02
#9
75
76
$20 END TEST MENU
#1 #6 FUNCTIONAL TEST
UNIT CONFIGURATION: #7
DRIVE CONFIGURATION: #8
TEST COMPLETE OR CTRL-C EXIT USED FROM KEYBOARD.
REMOVE ANY SCRATCH DISKETTE(S) FROM THE DRIVE(S) AND
INSERT THE DIAGNOSTIC DISKETTE IN THE ORIGINAL DRIVE.
AFTER COMPLETING THIS, PRESS <RETURN>. CONTROL WILL
THEN BE TRANSFERRED TO THE TEST CATEGORY SELECTION MENU.
> WHEN FINISHED, PRESS <RETURN>.
&
% MENU 20
#1
WS78
WS100 OR WS102
WS81, WS82, WS211, WS212, OR WS202
WS200
#6 DRIVE
RX01
RX02
#7
TEST UNIT A ONLY.
TEST UNIT B ONLY.
TEST BOTH UNITS A AND B.
TESTED CONTROLLER ONLY.
#8 DRIVE
TEST DRIVE 0 ONLY.
TEST DRIVE 1 ONLY.
TEST BOTH DRIVES.
TESTED CONTROLLER ONLY.
$22 RX01/RX02 PERFORMANCE EXERCISER
#1 PERFORMANCE EXERCISER
SELECT A UNIT:
TYPE:
1 - TO TEST UNIT A.
2 - TO TEST UNIT A AND UNIT B.
R - TO RETURN TO THE TEST CATEGORY SELECTION MENU.
&12R% MENU 22
#1
WS78
WS100 OR WS102
WS81, WS82, WS211, WS212, OR WS202
WS200
$23 SELECT DRIVE TYPE... UNIT A
#1 PERFORMANCE EXERCISER
UNIT SELECTED: UNIT A ONLY
SELECT A DRIVE TYPE:
TYPE:
1 - TO TEST AN RX01 DRIVE.
2 - TO TEST AN RX02 DRIVE.
R - TO RETURN TO THE TEST CATEGORY SELECTION MENU.
+------------------------------------------------------------------+
+ NOTE: THE RX01 DRIVE IS ALWAYS IN RX01 MODE. THE RX02 DRIVE MAY +
+ BE SET FOR EITHER RX01 OR RX02 MODE. THE MODE IS DETERMINED BY +
+ SWITCHES ON THE RX02 CONTROLLER BOARD. SWITCH SETTINGS ARE: +
+ +
+ RX01 MODE- SW1 ON, SW2 OFF +
+ RX02 MODE- SW1 OFF, SW2 OFF +
+------------------------------------------------------------------+
&12R% MENU 23
#1 SYSTEM
WS78
WS100 OR WS102
WS81, WS82, WS211, WS212, OR WS202
WS200
$24 SELECT DRIVE. UNIT A AND UNIT B
#1 PERFORMANCE EXERCISER
BOTH UNITS A AND B SELECTED.
SELECT A DRIVE CONFIGURATION:
TYPE:
1 - IF UNIT A AND UNIT B ARE BOTH RX01 MODE
2 - IF UNIT A AND UNIT B ARE BOTH RX02 MODE
3 - IF UNIT A IS RX01 AND UNIT B IS RX02
4 - IF UNIT A IS RX02 AND UNIT B IS RX01
R - TO RETURN TO THE TEST CATEGORY SELECTION MENU
+------------------------------------------------------------------+
+ NOTE: AN RX01 DRIVE IS ALWAYS IN RX01 MODE. AN RX02 DRIVE MAY +
+ BE SET FOR EITHER RX01 OR RX02 MODE. THE MODE IS DETERMINED BY +
+ SWITCHES ON THE RX02 CONTROLLER BOARD. SWITCH SETTINGS ARE: +
+ +
+ RX01 MODE- SW1 ON, SW2 OFF +
+ RX02 MODE- SW1 OFF, SW2 OFF +
+------------------------------------------------------------------+
&1234R% MENU 24
#1 SYSTEM
WS78
WS100 OR WS102
WS81, WS82, WS211, WS212, OR WS202
WS200
$25 AIRXAB PDP8A
#6 PERFORMANCE EXERCISER
SYSTEM TYPE SELECTED: #1
SELECT A DEVICE CODE:
TYPE:
5 - FOR DEVICE CODE 75
6 - FOR DEVICE CODE 76
R - TO RETURN TO THE TEST CATEGORY SELECTION MENU.
&56R%
#1
WS78
WS100 OR WS102
WS81, WS82, WS211, WS212, OR WS202
WS200
#6 DRIVE
RX01
RX02
$&
$