Directory of image this file is from
This file as a plain text file
10 OPERATING INSTRUCTIONS - FIELD SERVICE ACCEPTANCE 20 30 SYSTEM SOFTWARE ON DISK (DDS-340) 40 ----------------------- 50 60 1.0 STARTING THE SYSTEM 70 80 1.1 PLACE THE MASTER DISK IN UNIT 0; AND BRING UP THE 90 DISK UNIT. 100 110 1.2 IF THE SYSTEM HAS A HARDWARE DISK BOOTSTRAP, 120 MOVE THAT BOOTSTRAP SWITCH FROM THE OFF POSITION 130 TO THE ON POSITION. IF THERE IS NO HARDWARE 140 BOOTSTRAP, THE APPROPRIATE ROUTINE MUST BE ENTERED 150 AND STARTED (SEE APPENDIX B IN COS REFERENCE 160 MANUAL). 170 180 1.3 THE SYSTEM WILL READ A FEW BLOCKS FROM THE BEGIN- 190 NING OF THE DISK, THEN DISPLAY 200 210 DATE? 220 230 ON THE CONSOLE. 240 250 1.4 TYPE IN 260 270 DATE MM/DD/YY 280 290 WHERE 'MM/DD/YY' IS THE CURRENT DATE. 300 310 1.5 THE SYSTEM IS NOW UP AND RUNNING. 320 330 340 2.0 COPYING THE SYSTEM SOFTWARE DISK 350 360 2.1 BRING UP THE SYSTEM AS DESCRIBED IN 1.0. 370 380 2.2 MOUNT A SCRATCH DISK ON UNIT 1. 390 400 2.3 TYPE THE COMMAND 410 420 RUN PIP 430 440 PIP WILL BE READ FROM THE SYSTEM DEVICE AND STARTED. 450 460 2.4 PIP WILL DISPLAY 470 480 OPT- 490 500 RESPOND WITH C. 510 520 2.5 PIP WILL DISPLAY 530 540 IN- 550 560 RESPOND WITH DK0. 570 580 2.6 PIP WILL DISPLAY 590 600 OUT- 610 620 RESPOND WITH DK1. 630 640 2.7 THE SYSTEM WILL BE COPIED TO UNIT 1, AND PIP 650 WILL DISPLAY 660 670 OPT- 680 690 AGAIN. THE FILES HAVE BEEN COMPLETELY COPIED. 700 710 RESPOND WITH X 720 730 2.8 DISMOUNT UNIT 0, AND PUT THE MASTER COPY OF THE 740 SOFTWARE IN A SECURE PLACE. IT SHOULD BE MOUNTED 750 ON THE MACHINE ONLY FOR THE PURPOSE OF COPYING. 760 770 2.9 REMOVE THE DISK FROM UNIT 1 AND MOUNT IT ON UNIT 0, 780 SUCH THAT THE NEW COPY OF THE SYSTEM IS ON UNIT 0. 790 800 2.10 BRING UP THE SYSTEM AGAIN (SEE 1.0). 810 820 830 SYSTEM SOFTWARE ON DECTAPE (DDS-330) 840 -------------------------- 850 860 1.0 STARTING THE SYSTEM 870 880 1.1 PLACE THE MASTER TAPE ON UNIT 0, AND PUT THE TAPE 890 IN 'REMOTE' AND 'WRITE LOCK'. 900 910 1.2 IF THE SYSTEM HAS A DECTAPE BOOTSTRAP, MOVE THAT 920 BOOTSTRAP SWITCH FROM THE 'OFF' TO THE 'ON' POSITION. 930 IF THERE IS NO HARDWARE BOOTSTRAP, THE APPROPRIATE 940 ROUTINE MUST BE TOGGLED IN AND STARTED (SEE COS-300 950 REFERENCE MANUAL, APPENDIX B). 960 970 1.3 SEE 1.3 FOR DISK SYSTEM (ABOVE), SUBSTITUTING 'TAPE' 980 FOR 'DISK'. 990 1000 2.0 COPYING THE SYSTEM SOFTWARE 1010 1020 SEE 2.0 OF THE DISK INSTRUCTIONS, SUBSTITUTING 'TAPE' 1030 FOR 'DISK', AND 'DT0'&'DT1' FOR 'DK0'&'DK1'.