Directory of image this file is from
This file as a plain text file
5 10 15 FOR ALL SYSTEMS WITH DISKS 20 -------------------------- 25 30 35 3.0 RUNNING THE SOFTWARE ACCEPTANCE JOB STREAM 40 45 3.1 BRING UP THE SYSTEM (SEE 1.0 ABOVE). IF THE SOFTWARE 50 SYSTEM IS ON DECTAPE, WE WANT TO COPY IT TO DISK, 55 AND USE THE DISK AS A SYSTEM DEVICE. TO DO THAT: 60 65 TYPE 70 75 RUN SYSGEN/C 80 85 SYSTEM WILL ASK 'DO YOU WANT TO CHANGE THE SYSTEM 90 DEVICE?'. RESPOND WITH Y. 95 SYSTEM WILL ASK 'WHAT IS THE NEW SYSTEM DEVICE?'. 100 RESPOND WITH DK0. 105 SYSTEM WILL ASK 'DO YOU WANT TO TRANSFER YOUR FILES?'. 110 RESPOND WITH Y. 115 SYSTEM WILL ASK 'DO YOU HAVE AN ANALEX PRINTER?'. 120 RESPOND WITH Y, IF YOU HAVE AN ANALEX, AND N 125 IF YOU HAVE ANOTHER PRINTER (LP08, CENTRONIX). 130 SYSTEM WILL ASK '132 COLUMN MODEL?'. RESPOND WITH 135 Y, IF PRINTER HAS 132 COLUMNS, N FOR 80-COLUMN 140 PRINTER. 145 SYSTEM WILL ASK 'IS EVERYTHING CORRECT?'. REVIEW 150 YOUR ANSWERS TO THE QUESTIONS, AND RESPOND WITH 155 Y IF YOU ARE HAPPY WITH THEM. 160 THE TAPE WILL BE COPIED TO THE DISK. 165 170 TO USE THE DISK AS THE SYSTEM DEVICE, TYPE 175 180 RUN BOOT/RK 185 190 YOU ARE NOW RUNNING FROM THE DISK. 195 200 3.2 CREATE A SYSGEN INPUT FILE. THIS IS DONE BY USING 205 THE EDITOR, WHICH IS PART OF THE MONITOR. 210 215 TYPE 220 225 ERASE 230 LN 10,10 235 240 THESE COMMANDS TELL THE EDITOR THAT A NEW FILE IS 245 TO BE CREATED, WITH LINE NUMBERS STARTING AT 10 250 AND BEING INCREMENTED BY 10. THE EDITOR WILL 255 DISPLAY THE LINE NUMBERS, AND THE OPERATOR WILL 260 ENTER THE TEXT: 265 270 FOR SYSTEMS WITH DECTAPES IN ADDITION TO DISKS: 275 280 0010 DT1,46 285 0020 DT2,46 290 0030 DK0,5 295 0040 DK0,5 300 0050 DK0,5 305 0060 DK0,5 310 0070 DK0,5 315 0080 DK0,5 320 0090 DK0,5 325 0100 DK0,5 330 0110 DK0,5 335 0120 DK0,5 340 0130 <CTRL>Z 345 350 FOR SYSTEMS WITH DISKS ONLY: 355 360 0010 DK0,46 365 0020 DK0,46 370 0030 DK0,5 375 0040 DK0,5 380 0050 DK0,5 385 0060 DK0,5 390 0070 DK0,5 395 0080 DK0,5 400 0090 DK0,5 405 0100 DK0,5 410 0110 DK0,5 415 0120 DK0,5 420 0130 <CTRL>Z 425 430 WHEN THE <CTRL>Z IS TYPED, THE SYSTEM RESPONDS WITH 435 A PERIOD. 440 FOR SYSTEMS WITHOUT DECTAPES, THE RESPONSE TO THE 445 FIRST TWO LINES IS DK0,5 IN BOTH CASES. 450 455 460 TYPE 465 WRITE SYSTAB 470 475 THE FILE WILL BE WRITTEN ONTO THE SYSTEM DEVICE, 480 WITH THE FILE NAME 'SYSTAB'. 485 490 3.3 RUN SYSGEN 495 500 INSURE THAT THE PRINTER IS UP AND READY, THEN TYPE 505 510 RUN SYSGEN,SYSTAB 515 520 WHEN SYSGEN IS DONE, IT WILL DISPLAY A PERIOD 525 ON THE CONSOLE. 530 535 3.4 RUN THE JOB STREAM 540 545 PUT SCRATCH TAPES ON UNITS 1 AND 2 IF DECTAPES ARE PRESENT 550 555 560 TYPE 565 570 BATCH RKACC 575 580 THE RUN IS NOW SEMI-AUTOMATIC; ONLY OPERATOR RESPONSE 585 TO SYSTEM QUERIES IS NECESSARY. 590 595 3.4.1 CREATE A DATA FILE WITH 'BUILD'. 600 605 THE SYSTEM WILL DISPLAY 610 615 RUN BUILD,ACC02P,ACC02D 620 DO YOU WISH TO EDIT ON-LINE? 625 630 RESPOND WITH NO. 635 640 645 AT THIS POINT, THE SYSTEM MAY TYPE 650 655 REPLACE XXXXXX #NN? 660 665 IN WHICH CASE IT THINKS THAT A FILE, NAMED XXXXXX 670 ALREADY EXISTS ON SCRATCH AREA 3. RESPOND 675 WITH YES; THE AREA WILL BE USED AND ANY OLD FILE 680 DESTROYED. SINCE THIS IS A SCRATCH AREA, THAT 685 IS ALL RIGHT. 690 695 IN ALL OF THE INSTRUCTIONS BELOW, THE 'REPLACE' 700 QUERY AND ITS RESPONSE ARE OMITTED. IF THE 705 INSTRUCTIONS ARE FOLLOWED EXACTLY, THE RESPONSE 710 TO 'REPLACE' IS ALWAYS YES. 715 720 3.4.2 SORT THE FILE CREATED IN STEP 3.4.1. 725 730 THE SYSTEM WILL DISPLAY 735 740 RUN SORT,ACC03P 745 750 THE SYSTEM WILL DISPLAY 755 760 765 UNIT 03 IS FREE 770 775 3.4.3 CREATE A FILE WITH 'BUILD'. 780 785 SYSTEM WILL DISPLAY 790 795 RUN BUILD,ACC04P,ACC04D 800 DO YOU WISH TO EDIT ON-LINE? 805 810 RESPOND WITH NO. 815 820 825 3.4.4 UPDATE THE FILE CREATED IN 3.4.3. 830 835 THE SYSTEM WILL DISPLAY 840 845 RUN UPDATE,ACC05P 850 855 3.4.5 CREATE A FILE TO BE MERGED INTO THE FILE 860 CREATED IN STEP 3.4.4. 865 870 THE SYSTEM WILL DISPLAY 875 880 RUN BUILD,ACC06P,ACC06D 885 DO YOU WISH TO EDIT ON-LINE? 890 895 RESPOND WITH NO. 900 905 910 3.4.6 MERGE THE FILE FROM 3.4.4 WITH THE FILE 915 FROM 3.4.5. 920 925 THE SYSTEM WILL DISPLAY 930 935 RUN SORT,ACC07P/M 940 945 950 3.4.7 RUN A DIBOL COMPILATION. 955 960 THE SYSTEM WILL DISPLAY 965 970 RUN COMP,ACC08S 975 980 A LISTING WILL APPEAR ON THE PRINTER. 985 990 3.4.8 RUN THAT DIBOL PROGRAM. 995 1000 SYSTEM WILL DISPLAY 1005 1010 RUN 1015 1020 A REPORT WILL BE PRODUCED ON THE PRINTER, THE 1025 SYSTEM WILL DISPLAY A PERIOD. THE JOB STREAM 1030 IS COMPLETE. 1035 1040 3.5 COPY THE FINAL DATA FILE WITH PIP. 1045 1050 TYPE 1055 1060 RUN PIP 1065 1070 PIP WILL DISPLAY OPT- 1075 1080 RESPOND WITH D. 1085 1090 PIP WILL DISPLAY IN- 1095 1100 RESPOND WITH ACC08F,9 1105 1110 PIP WILL DISPLAY OUT- 1115 1120 RESPOND WITH ACCMAS,1 1125 1130 PIP WILL COPY THE FILE, THEN DISPLAY 1135 1140 MORE? 1145 1150 RESPOND WITH N. 1155 1160 PIP WILL DISPLAY 1165 1170 OPT- 1175 1180 AGAIN. RESPOND WITH X 1185 1190 YOU ARE DONE. 1195