10 OPERATING INSTRUCTIONS - FIELD SERVICE ACCEPTANCE
20 	
30 5.0	DISK EXERCISER
40 	---- ---------
50 	
60 	5.1  CHECK TO SEE THAT THE PRINTER IS READY, THEN TYPE
70 	
80 		BA EXDISK
90 	     
100 	     THE SYSTEM WILL DISPLAY
110 	
120 		RUN SYSGEN,SYSDSK
130 	   
140 	     THE SYSTEM WILL SEGMENT THE DISKS AND PRINT
150 	     ON THE LINEPRINTER THE LOGICAL UNIT ASSIGNMENTS.
160 	
170 	5.2  THE SYSTEM WILL DISPLAY
180 	
190 		RUN DISKXX
200 	
210 	     THE SYSTEM WILL DISPLAY
220 	
230 		EXERCISE DISK ?
240 	
250 	     TYPE  Y   TO RUN PROGRAM
260 	     TYPE  N  TO RETURN TO MONITOR
270 	
280 	5.3  THE SYSTEM WILL DISPLAY
290 	
300 		ENTER DISK #
310 	
320 	     TYPE  0  FOR  DK0
330 	           1  FOR  DK1
340 		   2  FOR  DK2
350 		   3  FOR  DK3
360 		
370 	5.4  THE SYSTEM WILL DISPLAY
380 	
390 		ENTER # OF PASSES
400 	
410 	     TYPE A NUMBER BETWEEN  1  AND  9999
420 	     FOLLOWED BY A  CARRIAGE RETURN
425 	     EACH PASS WILL TAKE APPROX. 30 MINUTES
430 	
440 	5.5  THE PROGRAM WILL NOW EXECUTE !
450 	
460 		AS EACH 500 RECORDS IS PROCESSED THE
470 		PROGRAM WILL DISPLAY
480 			
490 			XXXX  RECORDS PROCESSED
500 		
510 		AS EACH PASS IS COMPLETED THE PROGRAM
520 		WILL DISPLAY
530 	
540 			PASS  XXXX   OF   YYYY
550 		
560 		IF AN INCORRECT RECORD #  IS READ THE PROGRAM
570 		WILL DISPLAY
580 		
590 			RECORD #  READ  XXXX  RECORD # EXPECTED  YYYY
600 		
610 		THE PROGRAM WILL CONTINUE EXECUTION.
620 		
630 		THIS PROGRAM ASSUMES THAT DISK 0  IS NOT A
640 		SCRATCH DISK BUT HAS SUFFICIENT ROOM FOR  380
650 		SEGMENTS, OR APPROX.  6000  RECORDS.  ALL OTHER
660 		DISKS ARE ASSUMED TO BE SCRATCH DISKS WITH  404
670 		SEGMENTS OR APPROX.  6400  RECORDS.
680 		
690 	5.6  WHEN ALL PASSES HAVE BEEN COMPLITED THE SYSTEM
700 	     WILL RESPOND WITH
710 	
720 		EXERCISE DISK ?
730 	
740 	     TYPE  N  TO TERMINATE RUN
750 	     TYPE  Y  TO RE-RUN PROGRAM AT STEP  5.3