Directory of image this file is from
This file as a plain text file

*20
 
 
/MARK PROGRAM FOR PDP-12
/BY R.J.CLAYTON
/5-30-69
/COPYRIGHT 1969, DIGITAL EQUIPMENT CORP,
/MAYNARD MASS.
 
/VERSION MARK12-1,1970
 
SEGMNT 2
 
LMODE
*16
STDIAL,	701		/READ A GROUP INST.
	7300		/THIS WILL OVERLAY DIAL
			/WHICH STARTS AT 4020
 
 
DT=2000		/THIS IS A CONSTANT USED 
		/FOR REFERENCING CHAR TABLES
		/IN THE DATA FIELD
 
/THIS IS THE STARTING POINT OF 
/THE MARK PROGRAM.  DSP1 IS THE
/FIRST DISPLAY WHERE THE USER
/PICKS THE TYPE OF TAPE TO 
/FORMAT
 
DSP1,	LDF 3		/JUST IN CASE
	JMP QAINIT	/GO TO Q AND A SUBROUT.
	DT DS1		/FIRST FRAME
	ANS		/LOCATION FOR ANS.
	JMP REFRESH	/COME HERE TO REFRESH
 
	LDA		/HERE AFTER LINE FEED
	ANS
	SHD I
	6100
	JMP LTAPE	/GOOD SELECTION
	SHD I
	2000
	JMP PTAPE/	/ALSO GOOD SELECTION
	SHD I
	0200
	JMP BIGTAP	/ALSO GOOD SELECTION
	SHD I
	0400
	JMP DTAP
	SHD I
	0800
	JMP HTAP
	JMP DSP1	/GO BACK FOR A GOOD
			/SELECTION
 
			/BEEN GIVEN
 
 
 
 
/PROGRAM TO WRITE A
/STANDARD LINC FORMAT TAPE
 
LTAPE,	PDP
PMODE
	JMS ONMARK	/GET MARK TURNED ON
	JMS I KWRTAP	/GO WRITE THE TAPE
	2000	/BEGINING EM
	7777	/BEGINING IM
	0400	/256 WORDS PER BLOCK
	-10	/FIRST FWD BLK NUMB
	-10	/FIRST BKWD BLK NUMB
	1024	/TOTAL NUMBER OF BLOCKS
		/INCLUDES A FEW AT FRONT
		/AND BACK FOR TURN AROUND
	0005	/NO OF IM BETWEEN BLOCKS
	0010	/NUMBER OF FINAL IM CODES
	4000	/NUMBER OF FINAL EM CODES
 
	LINC		/TO LINC MODE
LMODE
	LDA I
	1000		/NO OF BLOCKS TO CHECK
	JMP CHECK	/CHECK WILL FINISH
			/THE JOB
 
 
 
/PROGRAM TO WRITE 129 WORD
/LINC FORMAT TAPE FOR TCO1
/SIMULATION
 
PTAPE,	PDP
PMODE
	JMS ONMARK
	JMS I KWRTAP
	2000
	7777
	0201
	-20
	-15		/THE OFFSET HELPS SEARCH
			/ON TAPE WITH SHORT BLOCKS
	3040
	005
	1777
	2000
 
	LINC
LMODE
	LDA I
	3000		/NUMBER OF DATA BLOCKS
	JMP CHECK
/
/PROGRAM TO WRITE 1600 STD BLKS
/IS LOCATED AT BIGTAP
/
 
 
 
 
 
 
KWRTAP,	WRTAP	/CROSS PAGE REF.
 
 
 
 
 
/SUBROUTINE TO TEST TAPE TRANSPORTS
/AND MARK SWITCH TO DETERMINE THAT
/IT IS OK TO MARK TAPE.
/MUST HAVE UNIT 1 SELECTED
/MUST HAVE UNIT 1 WRITE ENABLED
/MUST THEN PRESS MARK SWITCH
/SUBROUTINE WILL PREVENT BASHING
/TAPE ON UNIT 0
 
 
PMODE
ONMARK,	0000
	LINC
LMODE
 
 
DSP2,	JMP QAINIT	/USE Q AND A ROUTINE
DT DS2A		/AS A DISPLAY ROUTINE
			/THIS WILL BE THE FIRST
			/HALF OF THE DISPLAY, IT
			/IS DONE WITH THE TAPE 
			/GOING BACKWARD.
	ANS
	NOP
	LDA I
	0144		/SET UP FOR UNIT 1 AND
			/FORWARD MOTION
	IOB
	6152
 
	JMP QAINIT	/DO SECOND HALF OF THIS
	DT DS2B		/DISPLAY
	ANS
	NOP
 
 
	SET I 4		/THIS LOOP EQUALIZES
	-100
	XSK I 4		/THE FWD AND BKWD
	JMP .-1		/MOTION TIMES
 
	LDA I 
	5000	/SELECT MAINT REG TO
	IOB	/LOOK AT UNITS AND MTN
	6151
	CLR
	IOB
	6154	/SHOULD HAVE UNIT 1,
	SAE I	/WRITE ENABLED, AND 
	5777	/FWD MOTION
	JMP .+2	/NOT YET
	JMP MARKSW
 
OMKST,	LDA I
	0024		/START BACKWARD MOTION
	IOB
	6152
	JMP DSP2	/GO BACK AND TRY AGAIN
 
MARKSW,	LDA I
	0200
	AXO		/TRY TO SET MARK FLOP
	CLR
	MSC I 1		/READ IT BACK
	ROL I 5
	LZE I
	JMP OMKST	/NOT YET PRESSED
 
RET2,	PDP		/TO PDP8 MODE
			/MARK FLIP FLOP IS ON
			/AND TAPE IS FWD MTN.
PMODE
	CLA
	6151		/SET TAPE MAINT REG.
			/SO IOT 6154 WILL
			/TRANSFER AC TO TB
	JMP I ONMARK
 
 
 
/*4200		/ I REMOVED THIS
 
/DSP3
/THIS ROUTINE IS USED AFTER CHECKING
/A TAPE THAT THIS PROGRAM MARKED
/FROM HERE THE USER CALLS DIAL OR 
/MARKS ANOTHER TAPE
 
LMODE
DSP3,	JMP QAINIT	/TO DISPLAY ROUTINE
DT DS3		/CHECKING ROUTINE SETS
			/THIS LOCATION FOR FRAME
			/3 OR FRAME 4
	ANS	
	JMP DSP3R	/REFRESH RETURN
	LDA		/RETURN FROM LINE FEED
	ANS
	SHD I		/NOW TEST THE ANSWER
	6100
	JMP DSP1
	SHD I
	6200
	JMP STDIAL
	JMP DSP3
 
DSP3R,	LDA		/REJECT WRONG ANSWERS
	ANS
	SHD I
	6100
	JMP REFRESH
	S8D,I,
.FD %+.Z[VM:=VV57H/	7H< Y /	 000
	JMP REFRESH
	JMP DSP3	+AH[H[H[H[H[K+K+K+K+K(K$K$K(K(K(K(K(K(K(K(K(K(O$+$K K$K$
>=7????????