Directory of image this file is from
This file as a plain text file
[THIS MANUSCRIPT IS AN INDEX TO THE LAP6 MANUSCRIPTS FOR THE BLS SYSTEM [IN GENERAL, THE MANUSCRIPTS ARE NAMED WITH FIRST LETTER ABBREVIATIONS OF THE PROGRAM NAME AND THE CORRESPONDING MEMORY PAGE FOR WHICH THE CODE IS DESTINED [ [ [ [THE RELATIVE ADDRESSES OF THE BINARY ARE INCLUDED [WHERE B=FIRST BLOCK OF BASIC.F1 [AND S=FIRST BLOCK OF BASIC [ [ [STARTER PROGRAM [FILE= BASIC [ SPP0 S+0 [ SPP0A S+2 [ SPP2 S+5 [ SPP3 S+7 [ [COMPILER [FILE= BASIC.F1 [ CP0 B+0 [ CP1A B+4 [ CP1B B+6 [ CP2 B+10 [ [SYNTAX ERROR PROCESSOR [FILE= BASIC.F1 [ SEPP1 B+14 [ [TRANSITION PROGRAM [FILE= BASIC.F1 [ TPP0 B+34 [ ERRANAL--FOR PAGES 1 AND 2 B+36 [ TPP3 B+46 [ [RUN PROCESSOR [FILE= BASIC.F1 [ RPP0 B+50 [ RPP1 B+54 [ RPP2 B+57 [ [DEBUG PACKAGE [FILE= BASIC.F1 [ OVERLAY B+62 [ BASICD B+63 LENGTH=7 [ [ [ [A SYSTEM UTILITY FOR LOOKING AT TAPE IS INCLUDED AND IS NAMED ---DUMP----- [TO USE DUMP, [1. LOAD DUMP [2. ENTER THE TAPE UNIT AS REQUESTED ON THE SCOPE AND HIT EOL [3. ENTER THE BLOCK ON TAPE FOLLOWED BY EOL [4. THE NEXT DISPLAY ASKS FOR AN ADDRESS. DUMP ASSUMES THAT A CORE DUMP FROM A 2K LINC EXISTS AT THE TAPE BLOCK FURNISHED, SO THE ADDRESS IS 0<=ADDRESS<=3777. DUMP WILL FIND THE CORRECT TAPE BLOCK FOR THE REQUESTED ADDRESS [DURING THE DISPLAY OF THE TAPE CONTENTS, HIT DEL TO GO TO LAP6 ON TAPE UNIT 0. HIT EOL TO GET ANOTHER ADDRESS. PRESS START 20 OR START 400 TO START OVER WITH UNIT AND TAPE BLOCK. ANY OTHER KEY WILL BE ADDED TO THE LOCATION POINTER AND STEPPED FORWARD [WITH A CORE AREA DISPLAYED, SUCCESSIVE HITTING OF 1 WILL CAUSE THE PROGRAM TO STEP THROUGH THE DUMP LOCATION BY LOCATION. [ [ [ [HAROLD L. MACK [JUNE 19,1970 [END OF INDEX